Lots of people around with the car park very full.    On The Summit normal service was restored last week with kettles dominating, although JohnM’s Turbomotive seemed to have running issues.

Heyno Junction: another board was completed and attached, they are starting to become bespoke now so taking a little longer to make but the end is in sight.

This week the first of the very large boards connecting Evercreech New to The Summit fiddle yard was started – and as it’s roughly the size of a car it will need its own parking space!   One of these boards is destined to carry our take on the  eleven arch Prestleigh Viaduct.

 

Hamish was experiencing the ‘fun’ of freehand ballasting with N gauge Ballast, join the club!   The N gauge dept put together two more boards, this is going to be a long layout for tiny wheels!

Last week SJ was getting a final dust down and gremlins rectified.  The tower damaged in the previous weeks storm has been repaired.  A need for spare hand held controllers was identified and two have been kindly donated by Jim and converted from 4 pin DIN to 5 pin DIN.  Oddly GasWorks is 6 pin DIN so we couldn’t borrow those two controllers until we standardise on 6 pin DINs for South Junction.

Last week SteveS test ran his Kernow/Bachmann 4TC, probably the first in EM gauge.

Initially with a fake green Class 33/0 and ‘virtual’ jumper leads and then this week with a bagpipe fitted and heavily weighted (but still very slippery) Lima Class 73 on its long awaited 13mm Ultrascale nickel silver wheels.

The backscene at the town end has gained a stormy hue, and was test fitted before the weathered 4TC was photographed and the layout fully dismantled and packed away ready for a busy and exciting weekend at Taunton Rail-ex – all help gratefully received.  Don’t forget your corporate clothing and Yeovil MRG membership card to gain entry.

The minutes of the last committee meeting have been signed off and are available to read in the foyer. Also posted are two Exhibition availability sheets. So if you wish to be involved with taking/operating layouts at exhibitions but have been too shy to ask, please sign up, we can never have too many volunteers! A proper notice board has been ordered.

Lots going on again in CS2, and another new member!

South Junction was systematically taken down and packed away in stillages and boxes and then re-erected as a test for its rapidly approaching visit to Taunton Rail-Ex.   Just before 10pm a tank engine made its way cautiously round the layout.  Track joints require adjustment, one of the many point motors needs attention, and one of the controllers is playing up.   Thanks to the many members who turned up to help!

In preparation for the exhibition South Junction has gained a signal box for the Canal Junction that has been long planned but only recently executed and  in considerable style.  Here it is in the process of being planted in South Junction’s otherwise verdant landscaping.

 

 

 

The wood yard on South Junction has also recently gained facilities that CS2 sadly lacks.  Not an army, but staff loos based on those at Yandles.  Previously the workers would have walked to the other end of the layout where the garage is fully equipped!

 

 

Last week Hornby Magazine turned up for a photo shoot on The Summit.  However timing is everything and this week they missed an HST powered from both ends and with lights.  A sight so captivating for some that work nearly stopped on South Junction for a while.   Working well in both directions it was even hand signalled over the crossover in front of the signal box.  On the inner loop it turns out that there is not quite enough clearance for modern 70′ coaches resulting in the occasional derailment.
The N Gauge group have got stuck into base board construction so now have four boards ready for finishing..  On Holly Junction scenic work continues to progress, and space has been found for the layout to be extended to add further scenery and to grow the fiddle yard.

A delivery of plywood was received just before the timely arrival of the ice cream van.  Baseboard construction continued on Heyno Junction and significantly strips of plywood were cut ready to start the build for the new boards that will join Evercreech New to The Summit fiddle yard.

 

YMRG had another very successful Open Day with increased takings largely due to the well supported raffle.   The refreshments were excellent, and we had sixteen layouts in operation.  Our members and the many visitors appeared to have an enjoyable time with many favourable comments received.

 

 

 

 

This is supposed to be a fun and constructive hobby and hopefully the group were again able to demonstrate just how much construction (and fun) there is to be had!

 

 

 

An example of the correct application of rule #1 on the The Summit.

For anyone interested in the full length Lima HST seen on South Junction,  details of the various upgrades carried out so far (and planned) can be found here.

Preparations for Open Day on July 15th are now well advanced with a huge tidy up under way throughout the building.  On a very hot Wednesday afternoon we managed to move Heyno Junction into position at the end of CS2, shuffle Gas Works round a bit so that operators can get round the back and removed some carpets from corridors (potential trip hazards) all helped by essential purchases from the ice cream man when he arrived.

The new LED lights continue to be put together on South Junction to the point where the fiddle yard was lit for the first time with the new lights revealing that the LED strips used are not as bright as those used on The Summit and may need a rethink.   The junior layout continues to progress, a section of Yeovil Town made a welcome return and personalised mugs appeared on Holly Junction complete with Holly Junction totem.

Thanks to the generosity of members and friends we have the following prizes for the raffle:

– Oxford Models Adam Radial in BR livery
– Sunday lunch for 2 at the Mason’s Arms in Lower Odcombe
– DCC Train Automation loco decoder
– DCC Concepts ADS-2fx solenoid decoder
– Paull’s of Martock £10 voucher
– A bottle of Cockburn’s Special Reserve Port
– Eddie Stobart Special Edition Lorry model
– Box of chocolates
– Bottle of white wine

Any other prizes will be most welcome.

With only 3 weeks to go to Open Day, we will need to crack on with the tidy up of the first half of CS2.  We are nearly there now and look forward to a good turnout of members on the day.

It’s been a while since the last update, but much progress is being made in the run up to our Open Day in July.   First of all the long awaited re-organisation is in progress with Halsdon Road, Evercreech New and The Summit all re-located.   The drawings for the new baseboard to join Evercreech New to the The Summit fiddle yards are complete with baseboard construction planned to start after our Open Day in July.

 

At a recent ‘official’ club visit to the ever helpful James at DCC Trains Automation a Z21 control unit was selected and subsequently tested successfully on our newly adopted 00 gauge Diesel Maintenance Depot layout.  This layout will be wired for DCC as a test bed for Evercreech New and this control unit will also be used to control Evercreech New.

Holly Junction continues to progress with progress on all fronts and a dazzling display of lighting all individually switched, although clearly not on this occasion.

With a number of new and existing members having N gauge interests, a meeting of like minds is planning a 20′ by 10′ N gauge layout.  As one of these members is involved in planning the re-organisation of the club room, finding space should not be a problem!

 

 

Construction of Heyno Junction baseboards continues apace despite moving onto the well charted but weird and wonderful shaped boards that will complete the circuit at each ends.

 

 

 

The selective re-inforcement of the South Junction MDF fiddle yard boards is now complete with trains moving much more smoothly again.  Attention is turning to the revised lighting arrangements, the stillages for transport and a crash barrier for errant HSTs next to the scrap yard.  A backscene is being added to improve presentation and some state of the art trees are in preparation for this venerable EM gauge layout.

 

 

 

 

Following on from the last blog our two Railway Modeller cups posed on The Summit, the larger for 2017 and The Summit. The smaller the 1997 one for Gas Works.

 

 

 

Sadly this little fella also seen on the The Summit probably isn’t in contention for any award.   Whilst this could be seen as an innovative solution to the expense of 0 gauge locos; is it really right to deprive the family hound of a much loved plaything?

 

 

 

The Summit has won The 2016 Railway Modeller Cup Competition!  This was the 64th edition of the annual poll for the most popular article.  Voted on by the readers it apparently won by some margin; many thanks go to all those who took the time out to take part.  It is the first time an O gauge layout has won since 1997, and that was won by Gas Works!  The results in full will be in April’s edition.

Evercreech New will be an alternative DCC front (rather than analogue) for The Summit fiddle yard.  It has been decided that it will feature brand new models of the Pecking Mill Viaduct and Inn at one end and a near full length representation of Prestleigh Viaduct at the other.  All will feature on the new boards required to link the original station boards with the fiddle yard.  In the meantime The Summit will be re-erected and trains can be run again.

Wednesday saw all hands on deck;  two fiddle yard boards for Heyno Junction were constructed with one more to go, the track beds will then need stiffening and the removable scenic covers fabricated. Completion of these two boards will mean that over half of the boards of this large 00 gauge layout will have been built!

Nearly twenty years ago when the South Junction fiddle yard was re-modelled to eliminate conflicting moves MDF was used as it was the latest wonder material!  Two of the boards, one filleted to carry the flyover, and the other bearing a heavy control panel have subsided slightly and were removed for reinforcing with ply. Surgery is almost complete on the flyover with one board still to go. Whilst the boards were down the opportunity was taken to start the painting of the welded steel legs. Work also continued on the backscene which has done much to improve the appearance of this venerable EM gauge layout.

Gas Works boards were aligned so that it can now be run, and further civil engineering took place on Holly Junction with more street lighting in place.

 

The YMRG AGM will be held on Wednesday 8th February 2017 at 20:00 in CS2.   If members would like something added to the, as yet unformed agenda, please let Keith know. Make your own judgement as to whether it merits being a separate item or can simply be raised in AOB.